Reflections on 2021 December 30, 2021 11:42
So it seems this is becoming simply an annual blog post. Maybe my New Years resolution for 2022 will be to post more often......
This second pandemic year had its fair share of ups and downs. Jennifer and I both started 2021 by getting Covid 19. It was a terrible, pre-vaccine slog through the worst and longest illness I have ever had. 12 moths later we both have some lingering symptoms, though they are fortunately very mild.
Going Gnome has had a great year, over the course of which we released over a dozen new kits! We are currently working on getting the final touches done on our upcoming garden club that releases Jan 1 - nothing like leaving things till the last minute! But if you know nothing else about us by now, surely you know how much we seem to thrive under pressure.
A highlight for 2021 was making Fawkes the Phoenix right before Rhinebeck. This was such a fun project for us, again a mad dash under a ridiculous self imposed time line, but we got her done! I will include some of the process photos here in case you missed it on our Instagram story.
Here's to hoping I have something to say before 2022 :)
Step 1 - deconstruction and planning
Step 2: Wings
Step 3: obssess over whether it will work and if you can meet the self imposed deadline
Step 4: time to tackle the head, talons, and feathers!
Step 5: I think we're gonna make it!
We had found this really cool wrought iron antique lamp stand just for this project which allowed us to build her around it. We built a 1/2" PVC pipe into her body that could slide onto the stand and allow her to rest on the "perch"and be so large but stand and be stable. It was a perfect display piece for her, purchased while she was still in the conceptual phase.
And she's complete!
This beauty was one of the best projects we have ever made. She has flown to her new home and we know she will be happy and cared for there!
What we are working on and have made..... November 29, 2018 12:01 1 Commentwhat we've been up to......
Making a Felted Dragon! September 17, 2015 11:13 7 Comments
Some of our most frequently asked questions are about felted dragons. “How long did that dragon take to make?” “Did you use a pattern?” “Do you have a dragon kit?” “Are you going to have a dragon kit?” Since the answers to these questions are always the same: a long time, no, no, and probably not – I documented the last dragon I made in photos so, for those of you that are feeling ambitious and brave and want to try making one of your own you can see the steps I used to make one.
There are a lot of steps and pieces to making up a dragon. I usually decide on a color or range of colors I want to work with. (One dragon I made was completely designed around this vintage pair of buttons that I wanted to use for eyes.) The next thing I think about it size – how big do I want the dragon, and where might I want to display it. We often create dragons as part of our gnome environment. This dragon was designed to sit perched on top of our display tree. I wanted him to be lurking over the gnomes in a threatening way. I also wanted to make a completely different face style then I had ever made before. If you felt a lot you start to make things that all look alike. It can be difficult to breakout of the comfort zone a branch out. This had happened to me with my dragons, so I was determined to think outside the box for this one.
After I’ve decided what color my dragon is going to be, and how I want to display him (or where) I start look at “dragons” on Google images for inspiration pictures. I’m looking for interesting head shapes, leg positions, and body positions. Here are some of the images I used for this dragon:
Once I have a general concept, I begin with a foam coated wire the length of the dragon from snout to tail. This guy is about 3.5’ long. I start covering that with an un-dyed batting (no reason to have the more expensive dyed wool all the way through) I wrap the wool around the wire and felt as I go. This process is a little tedious. You can’t really work fast because if the needles hit the wire they break. This is one of the reasons we avoid working with armature as much as possible! I continue this wrap and felt process until I have a snake that’s about 2” in diameter. I knew I wanted this guy’s tail to wrap around the tree display that he would be perched on, so I felted this curvature into his tail right from the beginning.
Beginning the wrapping and felting process.....
In this picture you can see that I am starting to add bulk around the belly area. You can also see the colors I am planning to use there on the table.
One thing that I did on this dragon that I had never done before was to make the head as a completely separate piece. Jen and I do so much felting that we have to really watch out for physical stress and strain from it. When you are trying to sculpt and so fine detail (like eyes) It is cumbersome to be holding and turning the entire piece.
Once the body is felted and some shape has been set in, I start working on legs. Legs are a LOT of work! Feet, joints, toenails, and firmly felted enough to make the dragon stand! And there are 4 of them! Here are some pictures of the legs and feet in the works:
1. basic form 2. attaching the pieces 3. covering with color
4. Adding depth of color and talons! Don't forget there are 4 of these!
Once I finished the legs I had to attach them to the body. This is tricky and needs time and attention – for one thing you need a very strong attachment. You also want to make sure your dragon can stand firmly and be in the position you want. Lots to think about and lots of poking! I wanted to avoid this stage so I went ahead and made lots of spikes for decorating him later on.
Spikes, spikes, and more spike!!!!
When you can't avoid it any longer, go ahead and tackle that leg attachment!
Once the legs were attached it was on the fun part – the head! Once again I started with natural batting and planned to cover with color after I had the shape and size established. I put a foam cone in the neck and of the head to keep a hole that the neck could fit into when I was ready to put it all together. Dragon heads and faces are an amazing opportunity for getting creative and daring! As I said I wanted this head to look really different from past dragons. Keeping in mind I was going for fierce, and my dragons often turn out looking cute, I decided to make a pointed face and give him gold sharp looking eyes.
In these pictures you can also see the top and bottom eyelids that get attached around the eyes
One thing that often happens with dragons is that they take on their own look along the way. I often make parts that I don’t end up using later on because they just don’t suit the overall character. This neck piece I made looked great until I added the wings and then it just didn’t make sense. So….I ripped it off and voila he looked much better! Like I said they take on a life of their own.
One of the most difficult parts of any dragon is the wings. You want them to be strong and durable, but also fine and ethereal. Ethereal can be very difficult to achieve in needle felting. I use wire across the top of the wings, I also build them as one piece. This helps them be able to be built strongly into the body. I used regular sheet felt for this set and felted batting into the felt for decoration. Going with white for the wings was a total wild card - I did it because that's what I had and I didn't want to go to the fabric store ;) I actually love the way they turned out!
Once the wings were felted – I used one long wire across the top of both wings leaving a gap in the middle for attaching the wings to the body. With this dragon, once I had the wings built I realized the front legs weren’t quite right and needed to be added too before the wings could be attached – you can see there are lots of changes and modifications that go into making a dragon, as they influence their own creation. I finally got the wings on and 30 spikes on his head and back and voila! Finally finished! I love how he turned out, and am looking forward to seeing him lording over our gnome display at our shows this season. Hope this helps and inspires you to start your own dragon…….
Instructional Video Realeses May 5, 2015 14:37
Our first instructional video (FELT IT! Make Mini Gnomes) was released on April 29, 2015! We are very excited for the release of this video, and the 3 to follow in the next few months (Mushroom House, Owl Babies, and Sleeping Fox) It's been great working with Interweave, they are also carrying our kits in their on line store!
The link for the mini gnome and mushroom house videos are here, and I will continue to add the other links as they are released.
(The links for the videos can also be found on the corresponding felting kit page in our products catalog)
Please check them out and let us know what you think!
Also check out Anita's blog post about our new videos on Spinning Daily!
Mothers and their Babies April 20, 2015 00:00
Our wonderful mother died this past November.
All through the coldest, longest, and darkest winter in recent memory,
all we could felt were mothers and their babies.
Some of our best felting to date!
We miss you mom......
A felted chess Set April 13, 2015 00:00
As mentioned in the previous post we were invited to create an art piece for the gallery at Vogue Knitting Live in NYC. We decided to create a felted chess set, with the pieces consisting of Gnomes (obviously) vs. Vikings.
Viking King and Queen
Gnome King and Queen
We wanted the set to be larger than life so we chose to make it a 4ft. x 4ft. board with the pieces averaging around 12-14inches tall. It was a challenge to create pieces that people would be able to recognize as their traditional counterparts. Mushrooms were an obvious choice for the pawns on the gnome side, as were a gnome king and queen and viking king and queen. Bishops presented a bit of a representation challenge, being settled with tree gnomes on the gnome side and howling wolves on the viking side.
Viking dragon riders and gnome bear riders were fun to make for the knights.
The most frequently asked questions about building this felted chess set were: How long did it take? Did you each make a side? Can i make a move? We spent a total of about 200 hours working on the set, and were thrilled with the results! We both worked on both sides, though one of us made each set of companion figures (ie I made both wolf bishops on the viking side and gnome king and queen, Jen made both dragon rider knights and the viking king and queen. We both spent many hours making mushroom and rock monster pawns! We did let people (carefully) play the game both in NY and in Seattle - boy are there are a lot of chess enthusiasts out there!! Most were thrilled that the set was complete with a chess clock and and a gnome time keeper!
New ideas for new large scale art pieces are always swirling around.....stay tuned....
Going Gnome is getting a kick start! August 4, 2014 14:58
So, we've enlisted the help of our gnomes to get our kits packed with 100% US materials, and now in 100% US packaging! We have spent the past few months working hard to improve out great instructions - we've even added photo detail in them! The new kit design is amazing, but having the packaging made in the US means buying them in large quantity. The gnomes have launched this Kickstarter project to help us get the tubes here. Please check it out, share it with your friends, and back us if you can. You can get some great rewards - just a $25 pledge gets you a brand new, never before sold or seen felting kit - Prickle of Hedgehogs!!
Thanks for supporting us!
Where do your gnomes travel? April 17, 2014 12:42 1 Comment
2013 ended with, and 2014 began with our gnomes spending a lot of time on the road exploring new places!
The first big adventure was the trip to Chicago for Vogue Knitting Live!
We drove out and had an amazing weekend in the windy city with our dear cousin, and introduced so many mid westerners to the art of needle felting! We also got enjoy a trip down memory lane to the place where I was born - South Bend IN! We stopped by our old house, and low and behold the rock that our Dad painted with our initials 30 years ago is still there! The gnomes were excited to check it out.
We also got to see the amazing walnut forest that our neighbor planted for the future in his retirement - incredible how a forest can grow in 30 years!!! And though we didn't stop, we drove past good old Bonnie Doons Ice Cream!
We also detoured to Niagara Falls on the drive home!
After Chicago it was off to Brooklyn NY for the Renegade Craft Fair.
It was a great weekend accompanied by a bunch of visitors and some great holiday shopping for us all!
Some of our shop customers even stopped by to see us :)
We rang in the new year with another trip to NYC for another Vogue Knitting Live! Vogue New York was a first for us - we were asked to build an art piece for the artists gallery at the event. We created a 4'x4' chess set - Vikings vs. gnomes. It was so well received and was so much fun to create! Check the next blog post for details and more pictures.
Here is the set mid game:
With its great success in New York, the Chess set was invited to travel to Vogue Knitting in Seattle! this was a first trip to the west coast for going gnome. We added a few days to the trip to do some exploring on the Olympic peninsula which was breathtaking!
Now we are in high gear getting ready for our spring shows and our next trip to Maryland - This is a great one for us as we get to see so much family while we are there.
We will miss seeing our cousin Jay, as he has set off on his own gnome accompanied journey to thru hike the Appalachian trail from Georgia to Maine! His backpacking gnome friend Winthrop is keeping him company on this amazing 6 month hike.
They have already covered over 200 miles and are hiking strong!
Check out Jay's travel blog and witness his amazing woodland travels!
We are so lucky that our gnomes take us to so many wonderful places and allow us to meet so many amazing people.
So now we want to know - where do your gnomes travel???
New Gnome Photos September 20, 2013 12:46
With all the rain we've had mushrooms were springing up all over the place! what better inspiration for a gnome photo shoot could there be! Here's a few of the shots we got. We are felting away getting ready for the busy busy show season which begins in (gulp) 2 weeks. The ever present million dollar question remains - can we make enough stuff? Better get back to the felting, more to come.........